#!/usr/bin/python
# -*- coding: utf-8 -*-
# Copyright 2019 Red Hat
# GNU General Public License v3.0+
# (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)

#############################################
#                WARNING                    #
#############################################
#
# This file is auto generated by the resource
#   module builder playbook.
#
# Do not edit this file manually.
#
# Changes to this file will be over written
#   by the resource module builder.
#
# Changes should be made in the model used to
#   generate this file or in the resource module
#   builder template.
#
#############################################

"""
The module file for eos_l3_interfaces
"""

from __future__ import absolute_import, division, print_function


__metaclass__ = type


DOCUMENTATION = """
module: eos_l3_interfaces
short_description: L3 interfaces resource module
description:
  This module provides declarative management of Layer 3 interfaces on
  Arista EOS devices.
version_added: 1.0.0
author: Nathaniel Case (@Qalthos)
notes:
  - Tested against Arista EOS 4.24.6F
  - This module works with connection C(network_cli).
    See U(https://docs.ansible.com/ansible/latest/network/user_guide/platform_eos.html)
    'eos_l2_interfaces/eos_interfaces' should be used for preparing the interfaces,
    before applying L3 configurations using this module (eos_l3_interfaces).
options:
  config:
    description: A dictionary of Layer 3 interface options
    type: list
    elements: dict
    suboptions:
      name:
        description:
          - Full name of the interface, i.e. Ethernet1.
        type: str
        required: true
      ipv4:
        description:
          - List of IPv4 addresses to be set for the Layer 3 interface mentioned in
            I(name) option.
        type: list
        elements: dict
        suboptions:
          address:
            description:
              - IPv4 address to be set in the format <ipv4 address>/<mask> eg. 192.0.2.1/24,
                or C(dhcp) to query DHCP for an IP address.
            type: str
          secondary:
            description:
              - Whether or not this address is a secondary address.
            type: bool
          virtual:
            description:
              - Whether or not this address is a virtual address.
            type: bool
      ipv6:
        description:
          - List of IPv6 addresses to be set for the Layer 3 interface mentioned in
            I(name) option.
        type: list
        elements: dict
        suboptions:
          address:
            description:
              - IPv6 address to be set in the address format is <ipv6 address>/<mask>
                eg. 2001:db8:2201:1::1/64 or C(auto-config) to use SLAAC to chose an
                address.
            type: str
  running_config:
    description:
      - This option is used only with state I(parsed).
      - The value of this option should be the output received from the EOS device by
        executing the command B(show running-config | section ^interface).
      - The state I(parsed) reads the configuration from C(running_config) option and
        transforms it into Ansible structured data as per the resource module's argspec
        and the value is then returned in the I(parsed) key within the result.
    type: str
  state:
    description:
      - The state of the configuration after module completion
    type: str
    choices:
      - merged
      - replaced
      - overridden
      - deleted
      - parsed
      - gathered
      - rendered
    default: merged
"""

EXAMPLES = """
# Using merged

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Merge provided configuration with device configuration.
  arista.eos.eos_l3_interfaces:
    config:
      - name: Ethernet1
        ipv4:
          - address: 198.51.100.14/24
      - name: Ethernet2
        ipv4:
          - address: 203.0.113.27/24
    state: merged

# Task Output
# -----------
#
# before:
# - name: Ethernet1
# - name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1
# commands:
# - interface Ethernet1
# - ip address 198.51.100.14/24
# - interface Ethernet2
#   - ip address 203.0.113.27/24
# after:
# - ipv4:
#   - address: 198.51.100.14/24
#   name: Ethernet1
# - ipv4:
#   - address: 203.0.113.27/24
#   name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    ip address 198.51.100.14/24
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    ip address 203.0.113.27/24
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using overridden

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    ip address 198.51.100.14/24
# !
# interface Ethernet2
#    ip address 203.0.113.27/24
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Override device configuration of all L2 interfaces on device with provided
    configuration.
  arista.eos.eos_l3_interfaces:
    config:
      - name: Ethernet1
        ipv6:
          - address: 2001:db8:feed::1/96
      - name: Ethernet2
        ipv4:
          - address: 203.0.113.27/24
      - ipv4:
          - address: dhcp
        name: Management1
    state: overridden

# Task Output
# -----------
#
# before:
# - ipv4:
#   - address: 198.51.100.14/24
#   name: Ethernet1
# - ipv4:
#   - address: 203.0.113.27/24
#   name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1
# commands:
# - interface Ethernet1
# - ipv6 address 2001:db8:feed::1/96
# - no ip address
# after:
# - ipv6:
#   - address: 2001:db8:feed::1/96
#   name: Ethernet1
# - ipv4:
#   - address: 203.0.113.27/24
#   name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
#    ip address 203.0.113.27/24
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using replaced

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
#    ip address 203.0.113.27/24
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Replace device configuration of specified L2 interfaces with provided configuration.
  arista.eos.eos_l3_interfaces:
    config:
      - name: Ethernet2
        ipv4:
          - address: 203.0.113.27/24
    state: replaced

# Task Output
# -----------
#
# before:
# - ipv6:
#   - address: 2001:db8:feed::1/96
#   name: Ethernet1
# - ipv4:
#   - address: 203.0.113.27/24
#   name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1
# commands:
# - interface Ethernet2
# - ip address 203.0.113.28/24
# after:
# - ipv6:
#   - address: 2001:db8:feed::1/96
#   name: Ethernet1
# - ipv4:
#   - address: 203.0.113.28/24
#   name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
#    ip address 203.0.113.28/24
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using deleted

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    ipv6 address 2001:db8:feed::1/96
# !
# interface Ethernet2
#    ip address 203.0.113.28/24
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Delete L3 attributes of given interfaces.
  arista.eos.eos_l3_interfaces:
    config:
      - name: Ethernet1
      - name: Ethernet2
    state: deleted

# Task Output
# -----------
#
# before:
# - ipv6:
#   - address: 2001:db8:feed::1/96
#   name: Ethernet1
# - ipv4:
#   - address: 203.0.113.28/24
#   name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1
# commands:
# - interface Ethernet1
# - no ipv6 address 2001:db8:feed::1/96
# - interface Ethernet2
# - no ip address
# after:
# - name: Ethernet1
# - name: Ethernet2
# - ipv4:
#   - address: dhcp
#   name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using Parsed

# File: parsed.cfg
# ----------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    ip address 198.51.100.14/24
# !
# interface Ethernet2
#    ip address 203.0.113.27/24
# !

- name: Use parsed to convert native configs to structured data
  arista.eos.interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# parsed:
#  - name: Ethernet1
#    ipv4:
#      - address: 198.51.100.14/24
#  - name: Ethernet2
#    ipv4:
#      - address: 203.0.113.27/24

# Using rendered:

- name: Use Rendered to convert the structured data to native config
  arista.eos.eos_l3_interfaces:
    config:
      - name: Ethernet1
        ipv4:
          - address: 198.51.100.14/24
      - name: Ethernet2
        ipv4:
          - address: 203.0.113.27/24
    state: rendered

# Module Execution Result:
# ------------------------
#
# rendered:
# - interface Ethernet1
# - ip address 198.51.100.14/24
# - interface Ethernet2
# - ip address 203.0.113.27/24

# using gathered:

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    ip address 198.51.100.14/24
# !
# interface Ethernet2
#    ip address 203.0.113.27/24
# !

- name: Gather l3 interfaces facts from the device
  arista.eos.l3_interfaces:
    state: gathered

# Module Execution Result:
# ------------------------
#
# gathered:
#  - name: Ethernet1
#    ipv4:
#      - address: 198.51.100.14/24
#  - name: Ethernet2
#    ipv4:
#      - address: 203.0.113.27/24
"""
RETURN = """
before:
  description: The configuration prior to the module execution.
  returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged)
  type: dict
  sample: >
    This output will always be in the same format as the
    module argspec.
after:
  description: The resulting configuration after module execution.
  returned: when changed
  type: dict
  sample: >
    This output will always be in the same format as the
    module argspec.
commands:
  description: The set of commands pushed to the remote device.
  returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or C(purged)
  type: list
  sample:
    - interface Ethernet1
    - ip address 198.51.100.14/24
    - ipv6 address 2001:db8:feed::1/96
rendered:
  description: The provided configuration in the task rendered in device-native format (offline).
  returned: when I(state) is C(rendered)
  type: list
  sample:
    - interface Ethernet1
    - ip address 198.51.100.14/24
    - ipv6 address 2001:db8:feed::1/96
gathered:
  description: Facts about the network resource gathered from the remote device as structured data.
  returned: when I(state) is C(gathered)
  type: list
  sample: >
    This output will always be in the same format as the
    module argspec.
parsed:
  description: The device native config provided in I(running_config) option parsed into structured data as per module argspec.
  returned: when I(state) is C(parsed)
  type: list
  sample: >
    This output will always be in the same format as the
    module argspec.
"""


from ansible.module_utils.basic import AnsibleModule

from ansible_collections.arista.eos.plugins.module_utils.network.eos.argspec.l3_interfaces.l3_interfaces import (
    L3_interfacesArgs,
)
from ansible_collections.arista.eos.plugins.module_utils.network.eos.config.l3_interfaces.l3_interfaces import (
    L3_interfaces,
)


def main():
    """
    Main entry point for module execution

    :returns: the result form module invocation
    """

    required_if = [
        ("state", "merged", ("config",)),
        ("state", "replaced", ("config",)),
        ("state", "overridden", ("config",)),
        ("state", "rendered", ("config",)),
        ("state", "parsed", ("running_config",)),
    ]
    mutually_exclusive = [("config", "running_config")]
    module = AnsibleModule(
        argument_spec=L3_interfacesArgs.argument_spec,
        required_if=required_if,
        supports_check_mode=True,
        mutually_exclusive=mutually_exclusive,
    )

    result = L3_interfaces(module).execute_module()
    module.exit_json(**result)


if __name__ == "__main__":
    main()